Locations
1/15 Brock st, Thomastown VIC, 3074
17 Myer Court, Beverly South Australia, 5009
CONSTRUCTION | TRADES | HOSPITAL | SCHOOLS | CIVIL
SAME DAY DELIVERY
Same Day Delivery - Metro Only
-
All types
-
16L Pro Mop Bucket
-
5 Kant Point Chisel - SDS Plus
-
ATS-EVO Heavy Duty Anchors
-
Adhesives
-
Aluminium / Steel - Dome Head Rivets (Trade Pack)
-
Aluminium Handle with Universal Thread
-
Ball Point Pens
-
BarGuard
-
Barricade Tape
-
Black Steel Star Posts
-
Blow Pump
-
Bollard
-
Builders Polly
-
Bunting
-
CONCA Economy Screw Bolt - Countersunk Head
-
Cable Ties
-
Centerpin Anchoring Assembly
-
Chemofast BA PRO Stainless Steel Wedge Anchor
-
Chisels - SDS Plus
-
Chisels Enduro - SDS Plus
-
Cleaning Products
-
Copy Paper
-
Core Bit Rescue Tool
-
Diamond
-
Dome Head Rivets
-
Drill Stand Large 1000mm
-
Drop-In Anchors
-
Drop-In Anchors (Lipped)
-
Dust Mask
-
Earplugs
-
Elongation Rods for Greater Drilling Depth
-
Fire Blanket
-
Fire Extinguishers
-
Flat Chisel - SDS Max
-
Flat Chisel Enduro - SDS Max
-
Flat Chisel Enduro - SDS Plus
-
Glove Clip Keeper
-
Grouts & Concrete Repair
-
HSS-Co Cobalt Twist Drill Kit
-
Hangers
-
Hard Hat
-
Head Rivets
-
Hearing Protection
-
Heavy Duty Anchor
-
Joint Fillers & Sealers
-
Metal Light Duty
-
Metal Plaster-Bites
-
Molabolt
-
Mop Head
-
Mortar Rake Chisel - SDS Max
-
Nylon - Light Duty
-
Nylon Anchors
-
PVC Horseshoe Packers
-
Panel Brace Anchors
-
Paper Towels
-
Pipe Clamps
-
Plastic Spaghetti Roll
-
Point Chisel - SDS Max
-
Raptor Premium SDS Plus 2 Cutter
-
Raptor Ultimate SDS Max Extensions
-
Ratio Quick Adaptor SDS Plus
-
Rebar Breakers - SDS Plus
-
Roll Towel
-
Safety Boot
-
Safety Glasses
-
Safety Gloves
-
Screws
-
Sleeve Anchor - CountersunkSleeve Anchor - Countersunk
-
Sleeve Anchors - Eye Bolts
-
Spade Chisel - SDS Max
-
Spade Chisel Enduro - SDS Max
-
Spade Chisel Enduro - SDS Plus
-
Spray Paint
-
Star Post Driver
-
Star Post Remover
-
Strike Anchor - Countersunk Head
-
Sugar
-
Sun Protection
-
Surface Treatments
-
Water
-
Water Proofing
-
Wiper Cloths
-
XTM Drop-In Anchors (Non-Lipped)
-
Yellow Plastic Safety Caps
Menu
-
Shop by collectionSafety & Site EquipmentDrilling
-
Chisels
- Flat Chisel - SDS Plus
- 5 Kant Point Chisel - SDS Plus
- Point Chisel - SDS Max
- Flat Chisel Enduro - SDS Max
- Spade Chisel Enduro - SDS Max
- Mortar Rake Chisel - SDS Max
- Point Chisel Enduro - SDS Max
- Gouge Chisel - SDS Plus
- Spade Chisel - SDS Max
- Spade Chisel Enduro - SDS Plus
- 5 Kant Point Chisel - SDS Plus
- 5 Kant Point Chisel Enduro - SDS Plus
-
SDS Max
Site SetupRivetsAdhesivesGrouts & Concrete RepairJoint Fillers & SealersScrewsWater ProofingSurface Treatments -
-
Menu
IFS Group
Supply. Deliver. Support.
We use cookies and similar technologies to provide the best experience on our website.
70 products
Sort by:
70 products
Anchoring Assembly/Centrepin (2.100.009) is used for the fastening of the Karat Drill Stands (compact or large). for use with ICCONS M12 Drop-in Anchors.
47311856566457
Due to its high performance as well as its easy and quick installation, the wedge anchor BA PRO with European Technical Assessment can be used for a wide variety of applications. The long thread length and two approved anchoring depths allow the BA PRO wedge anchor greater flexibility of use. The option for reduced anchoring depth saves time during drilling and reduces the installation effort. Using a dustless drill bit also eliminates the need for blowing out the drilled hole.
The wedge anchor BA PRO stainless steel (A4) M8 – M20 is also approved for use under seismic loading C1 and C2.
The stainless steel (A4) BA PRO wedge anchors ensure a higher corrosion resistance and are better suited for applications under more aggressive climate conditions.
47144727445689
CONCA Countersunk Head Screw-Bolt by ICCONS is a screw-in, self-tapping concrete and masonry screw anchor for use in a wide range of applications found in the residential, commercial and infrastructure construction spaces. Installation is quick and easy, simply drill, clean the hole and screw in the anchor. Available in 6mm and 8mm in various lengths, CONCA Countersunk Head Screw-Bolts by ICCONS are the economic anchoring solution for non-safety-critical applications.
CONCA Screw Bolts by ICCONS achieve high loads while generating low expansion forces which can make it a great alternative to adhesive anchors. Unlike mechanical expansion anchors, the CONCA Screw-bolt keys into the base material for the entire depth and diameter of the hole, not just at the base of the hole. The CONCA Screw Bolt is a truly versatile anchor, as it can be installed in whole range of base materials such as concrete, block, brick, timber, marble, and stone, just to name a few.
47144707915961
For the retrieval of stuck core bits with a 1 1/4 threading. This handy tool can prevent irreversible damage to expensive diamond core bits when trying to remove them from a hole. Slithers of reinforcing bar can get caught in-between the core bit and the concrete causing them to jam. with the use of the Core Bit Rescue Tool, these stubborn core bits can be removed.
47311856631993
1000MM Drill Stand for Karat 130/300 Drill motors. This larger stand enables the use of longer core bits.
47311899525305
ICCONS lipped drop-in anchors are a single piece internally threaded expansion anchor suitable for solid base material available in carbon steel zinc plated. The anchor is set by displacement of the pre-assembled expander cone to enable full expansion of the anchor body. *User must ensure the correct size of setting tool is used in conjunction with the correct size drop-in anchor. The lip feature ensures the anchor will mount flush with the concrete surface for consistency. The internal thread is suitable for machined bolts or threaded rod.
47598397849785
ICCONS standard drop-in anchors are a single piece internally threaded expansion anchor suitable for solid base material available in carbon steel zinc plated and 316 stainless steel. The anchor is set by displacement of the pre-assembled expander cone to enable full expansion of the anchor body.
*User must ensure the correct size of setting tool is used in conjunction with the correct size drop-in anchor. The internal thread is suitable for machined bolts or threaded rod.
*This range will be transitioning to the XTM Drop-In Anchor range.
47598468104377
ICCONS standard drop-in anchor setting tool is required for correctly setting ICCONS range of standard and approved, zinc or stainless steel drop-in anchors. *User must ensure the correct size of setting tool is used in conjunction with the correct size drop-in anchor.
47598279622841
Showing 32/70
NextRelated Collections.
Need help
Got questions? Call us
(03) 9357 4223
sales@ifsvic.au
Contact
Got questions? Call us
(03) 9357 4223
sales@ifsvic.au
Contact
Subscribe to our emails
© 2026,
IFS Group.Copyright ©2026 | Independent Fastening Systems Pty Ltd. Cookie Policy|Privacy Policy